Replace if the head is warped or cracked. Many times a leak occurs because of a hairline fracture. To be sure, spray a soapy water solution around the head and if you see bubbles, this is where the leak is. Always replace gaskets when installing a new head, and remove (and sand) the head of any old gasket material.
This item fits the following models:
Don't forget the Teflon tape for the threads of your air lines!
Teflon Tape (Thread Seal Tape)
$1.95
Over 350 pneumatic fittings. Most are 1/4" and 3/8" NPT. Selling at 75% lower than our cost! Brand new. Never used. Most made by Coilhose Pneumatics.
Lot of air fittings
$125.00 $99.00
Quickest way to drain your tank!
1/4" Ball Valve Drain Cock
$8.64 $6.95