| (not shown) | Cylinder Head Kit | Order this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc.
Note: New style pump head has only ...Order this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc.
Note: New style pump head has only one air line coming off of pump head. If your old pump had 2 lines, order parts MP513901SJ and CV221800AV to adapt this to your unit.... [+] | $111.28 |  | (X) | Factory B/O, no ETA |
| (not shown) | Air Chuck (not Shown) | | $0.00 | | (X) | NLA
No Info |
| (not shown) | Air Hose (not Shown) | | $0.00 | | (X) | NLA
No Info |
| (not shown) | Ground Clip (not Shown) | | $0.00 | | (X) | NLA
No Info |
| (not shown) | Wrench | | $0.00 | | (X) | NLA
No Info |
| 00001 | TAPPING SCREW10-24 X 58 Replaced by ST073277AV | Used on model VT634500 | $0.89 |  | Quantity:
| - |
| 00002 | Gasket HD Top Plt | | $12.68 |  | (X) | Factory B/O, no ETA |
| 00003 | Filter Vt Hv Head Foam | Check to see if you need to order 1 or 2. | $2.93 |  | Quantity:
| - |
| 000039A | Safety Valve 1/4 NPT ASME | Rating 140 PSI
If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature. Used with WL650801. | $16.51 |  | Quantity:
| - |
| 00006 | Screw | | $0.00 | | (X) | NLA
No Info |
| 00007 | Head Top Plate | | $0.00 | | (X) | NLA
No Info |
| 00008 | Screw | | $0.00 | | (X) | NLA
No Info |
| 00009 | Flapper Valve (intake) | Thickness .008 | $6.71 |  | (X) | Factory B/O, no ETA |
| 00010 | Flapper Valve (Exhaust) | Thickness .015 | $5.30 |  | Quantity:
| - |
| 00011 | Screw | | $0.00 | | (X) | NLA
No Info |
| 00012 | Piston Pin | | $8.92 |  | Quantity:
| - |
| 00013 | Piston Ring Set | | $0.00 | | (X) | NLA
No Info |
| 00013A | Piston Ring Kit | Must order quantity 2 for both pistons (qty 1 = rings for one piston only). | $33.68 |  | Quantity:
| - |
| 00014 | Piston | Replace this if the rings do not rotate freely in their grooves. | $0.00 | | (X) | NLA
No Info |
| 00014A | Piston Service Kit | Replace this if the rings do not rotate freely in their grooves.
Note: Kit does not include rings | $34.96 |  | Quantity:
| - |
| 00015A | Welch Plugs | | $0.00 | | (X) | NLA
No Info |
| 00016 | Piston Ring Kit | Must order quantity 2 for both pistons (qty 1 = rings for one piston only). | $33.68 | | Quantity:
| - |
| 00016A | Piston Ring Set | | $0.00 | | (X) | NLA
No Info |
| 00017 | Hx HD Scr | | $0.00 | | (X) | NLA
No Info |
| 00018 | CONN ROD MACHINED | Please Note: These new style rods are thinner than the original. The rod will have no movement once the cylinder is in place.
Length: 5 7/8" | $35.80 |  | Quantity:
| - |
| 00019 | Cylinder | Bare cylinder for pump. . | $0.00 | | (X) | NLA
No Info |
| 00019A | Cylinder | | $0.00 | | (X) | NLA
No Info |
| 00020 | Cylinder Gasket | | $7.29 |  | (X) | Factory B/O, no ETA |
| 00020A | CYLINDER GASKET | Note: order this item for model VT4300 only. | $10.02 |  | (X) | Factory B/O, no ETA |
| 00021 | Crankcase Assembly with Bearings | | $0.00 | | (X) | NLA
No Info |
| 00022 | Pipe Plug | | $0.00 | | (X) | NLA
No Info |
| 00023 | PIPE PLUG 14-18 NPT | 1/4-18 IND HX HD | $1.57 |  | Quantity:
| - |
| 00024 | SCREW HHD - 516-18 X 34 | | $0.00 |  | (X) | NLA
No Info |
| 00025 | Bearing | If loose or dirty, replace these when rebuilding pump. . | $0.00 | | (X) | NLA
No Info |
| 00025A | Needle Bearing | Note: order this item for model VT4300 only. | $0.00 | | (X) | NLA
No Info |
| 00026 | Crankshaft | | $0.00 | | (X) | NLA
No Info |
| 00026A | Crankshaft | | $0.00 | | (X) | NLA
No Info |
| 00027 | 316 X 1 SHAFT KEY | For flywheel. | $1.09 |  | Quantity:
| - |
| 00028 | Bearing Cap Gasket | | $4.45 |  | Quantity:
| - |
| 00029 | Bearing Cap Assembly with Bearings | | $0.00 | | (X) | NLA
No Info |
| 00029A | Bearing Cap Assembly with Bearings | | $0.00 | | (X) | NLA
No Info |
| 00030 | Oil Seal | | $5.57 |  | Quantity:
| - |
| 00031 | Screw | (8 Pack) . | $0.00 | | (X) | NLA
No Info |
| 00032 | Flywheel | Note: order this item for all models except model VT4200. | $102.70 |  | Quantity:
| - |
| 00033 | SET SCR 38-16 X 34 | For flywheel, (standard thread, not metric). | $1.49 |  | Quantity:
| - |
| 00034 | Axle Bolt Hex Head | Note: Also used on models VT627000, VT629100, VT618202, and VT622001 | $5.57 |  | Quantity:
| - |
| 00035 | WHEEL, 10" BLACK HUB | For WL611800 Compressor and others. | $33.16 |  | (X) | Factory B/O, no ETA |
| 00036 | 1/4" Knurled Drain Cock | Keep your tank from rusting. Replace this if leaking or will not work. | $6.10
$4.99 |  | Quantity:
| - |
| 00037 | FLANGE NUT 38-16 | Also used on models VT627000, VT629100, VT618202 and VT622001 | $1.40 |  | (X) | Factory B/O, no ETA |
| 00038 | SET SCR 14-20 X 12 | These screws are currently out of stock at the manufacturer and can not be purchased. | $2.02 |  | Quantity:
| - |
| 00039 | Safety Valve | If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature. | $0.00 | | (X) | NLA
No Info |
| 00040 | SCREW HHD - 516-18 X 34 | | $0.00 | | (X) | NLA
No Info |
| 00041 | Screw | | $0.00 | | (X) | NLA
No Info |
| 00042 | Nut | (8 Pack) . | $0.00 | | (X) | NLA
No Info |
| 00043 | 1/4" Pipe Nipple | 1/4" MPT x 1 1/2" hex pipe nipple; steel. Use this to convert female threads to male threads. | $3.00 |  | Quantity:
| - |
| 00044 | Handle VT VS WL Black | | $20.99 |  | (X) | Factory B/O, no ETA |
| 00045 | Air Receiver Assembly | | $0.00 | | (X) | NLA
No Info |
| 00046 | Manifold | Replace if cracked or broken. | $0.00 | | (X) | NLA
No Info |
| 00047 | Check Valve | Original check valve. Note: Does NOT include 1/8" port.
1/2" compression x 7/8"-14 UNF-2A threads. Order this when continuing to use your old pump. | $46.78 |  | (X) | Factory B/O, no ETA |
| 00048 | Motor | Click on "Electric Motors" in the left hand navigation bar to locate your motor. . | $0.00 | | (X) | NLA
No Info |
| 00048A | Motor | | $0.00 | | (X) | NLA
No Info |
| 00049 | WASHER PLAIN TYPE A 516N ZINC | | $1.63 | .jpg) | Quantity:
| - |
| 00050 | Strain Relief (power Cord) | HEYCO 7W-2 STR REL. Fits model VT618202, VT622301, VT627100 | $0.00 | | (X) | NLA
No Info |
| 00051 | Pressure Switch Cord | | $0.00 | | (X) | NLA
No Info |
| 00052 | Motor Cord & Plug | | $0.00 | | (X) | NLA
No Info |
| 00053 | Pressure Switch | If your valve is leaking on the side of the switch, do not order this part. Order check valve instead. To find a comparable pressure switch, click he ...If your valve is leaking on the side of the switch, do not order this part. Order check valve instead. To find a comparable pressure switch, click here.... [+] | $0.00 | | (X) | NLA
No Info |
| 00053A | Switch | | $0.00 | | (X) | NLA
No Info |
| 00054 | MOLDED FERRULE, 1/2" | | $3.13 |  | Quantity:
| - |
| 00055 | Compression Nut | | $0.00 | | (X) | NLA
No Info |
| 00056 | Motor Pulley | | $0.00 | | (X) | NLA
No Info |
| 00057 | Poly-Groove J-6 Belt, 49" | 49" & 6 Grooves | $14.93 |  | Quantity:
| - |
| 00058 | Screw | | $0.00 | | (X) | NLA
No Info |
| 00059 | Restrictors | | $0.00 | | (X) | NLA
No Info |
| 00060 | Piston Ring Kit | Must order quantity 2 for both pistons (qty 1 = rings for one piston only). | $33.68 | | Quantity:
| - |
| 00061 | 12TUBE-HEAD TO CK VALVE | | $16.15 |  | Quantity:
| - |
| 00062 | Gage | | $0.00 | | (X) | NLA
No Info |
| 00062A | GAUGE 2OD 300PSI .25NPT | Face type - 2". | $43.87 |  | (X) | Due: 06/16/2022 |
| 00063 | Compression Fitting Assembly | Compression Connector, 1/2" Comp X 3/8" MPT. | $12.28 |  | Quantity:
| - |
| 00064 | Foot | Fits models VT618202 and VT622001 | $6.38 |  | (X) | Factory B/O, no ETA |
| 00065 | Belt Guard Front | | $0.00 | | (X) | NLA
No Info |
| 00066 | Belt Guard Channel | | $0.00 | | (X) | NLA
No Info |
| 00067 | Belt Guard Bracket | | $0.00 | | (X) | NLA
No Info |
| 00068 | Plastic Screw-black | | $0.00 | | (X) | NLA
No Info |
| 00069 | Adapter | | $0.00 | | (X) | NLA
No Info |
| 00070 | Washer | (8 Pack) . | $0.00 | | (X) | NLA
No Info |
| 00071 | Regulator | Adjustable air pressure knob assembly. (Gauge sold separately). | $0.00 | | (X) | NLA
No Info |
| 00072 | NIPPLE 38-18 X 1 | | $10.71 | | Quantity:
| - |
| 00073 | Nipple | | $0.00 | | (X) | NLA
No Info |
| 00074 | Strain Relief | | $0.00 | | (X) | NLA
No Info |
| 00074A | Strain Relief | | $0.00 | | (X) | NLA
No Info |
| 00075 | 14TUBE-UNLOADER | | $0.00 |  | (X) | NLA
No Info |
| 00076 | Globe Valve | | $0.00 | | (X) | NLA
No Info |
| 00077 | REDUCER 3/8 - 1/4 NPT | | $3.40 |  | Quantity:
| - |
| 00078 | Gasket | | $0.00 |  | (X) | NLA
No Info |
| 00079 | Gauge | | $0.00 | | (X) | NLA
No Info |
| 00079A | GAUGE 2OD 300PSI .25NPT | Face type - 2". | $43.87 | | (X) | Due: 06/16/2022 |
| 00080 | Strain Relief | | $0.00 | | (X) | NLA
No Info |
| 00080A | CONNECTOR CABLE 35 | | $13.82 |  | Quantity:
| - |
| 00081 | Bearing | | $0.00 | | (X) | NLA
No Info |
| 00081A | Bearing | | $0.00 | | (X) | NLA
No Info |
Click here for our special offers!
