(not shown) | Cylinder Head Kit | Order this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc.
Note: New style pump head has only ...Order this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc.
Note: New style pump head has only one air line coming off of pump head. If your old pump had 2 lines, order parts MP513901SJ and CV221800AV to adapt this to your unit.... [+] | $117.21 |  | Quantity:
| - |
00001 | TAPPING SCREW10-24 X 58 Replaced by ST073277AV | Used on model VT634500 | $1.82 |  | Quantity:
| - |
00002 | Gasket HD Top Plt | | $14.37 |  | Quantity:
| - |
00003 | Filter Vt Hv Head Foam | Check to see if you need to order 1 or 2. | $3.58 |  | Quantity:
| - |
00009 | Flapper Valve (intake) | Thickness .008 | $15.78 |  | Quantity:
| - |
00010 | Flapper Valve (Exhaust) | Thickness .015 | $56.51 |  | Quantity:
| - |
00011 | Self-tapping Screw | Includes six (6) screws. | $3.58 |  | Quantity:
| - |
00014 | Piston Service Kit | Replace this if the rings do not rotate freely in their grooves.
Note: Kit does not include rings | $36.56 |  | Quantity:
| - |
00018 | CONN ROD MACHINED | Please Note: These new style rods are thinner than the original. The rod will have no movement once the cylinder is in place.
Length: 5 7/8" | $37.45 |  | Quantity:
| - |
00020 | Cylinder Gasket | | $8.27 |  | Quantity:
| - |
00023 | PIPE PLUG 14-18 NPT | 1/4-18 IND HX HD | $3.38 |  | Quantity:
| - |
00024 | SCREW HHD - 516-18 X 34 | | $0.00 |  | (X) | NLA No Info |
00027 | 316 X 1 SHAFT KEY | For flywheel. | $3.21 |  | Quantity:
| - |
00028 | Bearing Cap Gasket | | $5.04 |  | Quantity:
| - |
00030 | Oil Seal | | $6.29 |  | Quantity:
| - |
00033 | SET SCR 38-16 X 34 | For flywheel, (standard thread, not metric). | $3.21 |  | Quantity:
| - |
00034 | Axle Bolt Hex Head | Note: Also used on models VT627000, VT629100, VT618202, and VT622001 | $6.29 |  | Quantity:
| - |
00035 | WHEEL, 10" BLACK HUB | For WL611800 Compressor and others. | $37.60 |  | Quantity:
| - |
00036 | 1/4" Knurled Drain Cock | Keep your tank from rusting. Replace this if leaking or will not work. | $6.10 $4.99 |  | Quantity:
| - |
00037 | FLANGE NUT 38-16 | Also used on models VT627000, VT629100, VT618202 and VT622001 | $2.77 |  | Quantity:
| - |
00038 | Gasket | | $0.00 |  | (X) | NLA No Info |
00040 | SCREW HHD - 516-18 X 34 | | $0.00 |  | (X) | NLA No Info |
00041 | Screw | | $3.32 | | Quantity:
| - |
00043 | 1/4" Pipe Nipple | 1/4" MPT x 1 1/2" hex pipe nipple; steel. Use this to convert female threads to male threads. | $3.00 |  | Quantity:
| - |
00044 | Handle VT VS WL Black | | $70.01 |  | Quantity:
| - |
00047 | Check Valve | Original check valve. Note: Does NOT include 1/8" port.
1/2" compression x 7/8"-14 UNF-2A threads. Order this when continuing to use your old pump. | $53.07 |  | Quantity:
| - |
00049 | WASHER PLAIN TYPE A 516N ZINC | | $1.82 | .jpg) | Quantity:
| - |
00053 | 95-125 FURN TO CONDOR PS KIT | Note: order this item for models VT4150, VT4200, VT4300 and others. NOTE: Order new SRV250140 Safety Valve as well, because this new Pressure Switch i ...Note: order this item for models VT4150, VT4200, VT4300 and others. NOTE: Order new SRV250140 Safety Valve as well, because this new Pressure Switch is rated for max 125 PSI.... [+] | $142.54 |  | Quantity:
| - |
00054 | MOLDED FERRULE, 1/2" | | $3.27 |  | Quantity:
| - |
00057 | Poly-Groove J-6 Belt, 49" | 49" & 6 Grooves | $15.60 |  | Quantity:
| - |
00062 | GAUGE 2OD 300PSI .25NPT | Face type - 2". | $45.89 |  | Quantity:
| - |
00063 | Compression Fitting Assembly | Compression Connector, 1/2" Comp X 3/8" MPT. | $12.83 |  | Quantity:
| - |
00064 | Foot | Fits models VT618202 and VT622001 | $7.20 |  | Quantity:
| - |
00071 | 1/4" Pipe Nipple | 1/4" MPT x 1 1/2" hex pipe nipple; steel. Use this to convert female threads to male threads. | $3.00 |  | Quantity:
| - |
00073 | NIPPLE 38-18 X 1 | | $10.71 | | Quantity:
| - |
00074 | Safety Valve 1/4 NPT ASME | Rating 140 PSI
If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature. Used with WL650801. | $28.58 |  | Quantity:
| - |
00076 | NIPPLE 14-18 X 2-12 | For model WL651001 and others. | $16.63 |  | Quantity:
| - |
00079 | WASHER PLAIN TYPE A 516N ZINC | | $1.82 | .jpg) | Quantity:
| - |