close audio
You Are Here: Front Page » Air Compressor Parts: Belts, Filters, Regulators & More » Coleman Powermate Air Compressor Parts | Air Compressor Parts Online » Coleman, Sanborn Pumps & Parts » 040-0311 165 Pump (coleman Sanborn)

165 Pump (coleman Sanborn) 273.73 $257.63

Coleman, Sanborn Pumps & Parts

Product Details
040-0430 - 165 Pump (coleman Sanborn)

Found under the following brands: A1 Coupling & Hose, Popular Brands, ProForce, Coleman Powermate Sanborn, Craftsman, Industrial Air, Kobalt, Morgan, Porter Cable, Task Force

For 5 to 6.5 HP units. New Pump with felt air filter to replace original pump. Flywheel NOT included. Simply swap out flywheel, add oil and run.  

NOTE! New style pump has 1/4" FPT & 1/8" FPT outlet ports in head (Your old head may be 1/2" and will need an adapter). Part# 68-6-4 is the adapter for old pumps with a 3/8" OD discharge tube; part# 068-0063 is the adapter for old pumps with a 1/2" OD discharge tube.

The pump compresses air and sends the pressurized air to an air receiver/tank for use. The two types of pumps are reciprocating pumps (by far the most common in construction and residential use) and rotary screw pumps. Many pumps are cast iron but can also be aluminum. In air compressors, there exist oil-free and oil-bath pumps. Oil-free pumps use bearings and a Teflon-coated compression ring and reed valves to produce compression, while oil-bath pumps use standard conrods, pistons and rings with an oil-filled crankcase. Oil-bath pumps are generally longer lasting, quieter and product more CFM/PSI; oil-free pumps don’t require much maintenance and are convenient and portable. A clean air filter and good, proper oil (if applicable) will keep your pump running for years to come.

Product Specifications

1 or 2 stage 1
Head unloaders No
Motor HP Min 5
Max Pressure 155
CFM 10.1 CFM @ 90 PSI
Oil Bath/Oil Free Oil Bath
Flywheel size 12"
Pump material Aluminum (cast iron cylinders
RPM Min/Max 700/1200
Oil Capacity (ozs) 18 oz
Pump Weight 48
Truck Only? No

5.75" S-S, 5.87" F-B

Warranty 1-yr for Residential use, 90-day for Commercial use
Extra Details

You may need to order an outlet adapter when ordering a new pump! Order part# 068-0063 if you have a 1/2" discharge tube (just measure the OD of the tube). Order part# 68-6-4 if you have a 3/8" tube!

Be sure to torque the head bolts down after the first 5 hours of running new pump, this will ensure the head gaskets don't blow out.

Your question about this product has been received!
Just Arrived!

Don't forget the Teflon tape for the threads of your air lines!

Teflon Tape (Thread Seal Tape)

Teflon Tape (Thread Seal Tape)


Quickest way to drain your tank!

1/4" Ball Valve Drain Cock

1/4" Ball Valve Drain Cock